Isodaq Technology is now part of Hydro International.

Q-Eye PSC MT

Summary

  • Sensor: 1 x velocity
    1 x water level
  • Range: velocity ± 5,3 m/s
    water level (ultrasonic) 0,04 – 1,3 m
    expandable via external - 4-20mA sensor
  • Accuracy: ± 1% of measured value for v and h (ultrasonic)
    ± 2% for flow
  • Communication: RS485, MODBUS (RS232 or RS485),
    WLAN, GPRS
    Ethernet 10/100 Mbps

Q-Eye PSC MT

Full Description

The Q-Eye PSC MT permanemt velocity area flow meter is designed for applications in full or partially full pipes 100 - 2000 mm (4 - 80 inches) in diameter, or open channels with flow depths 40 - 2000 mm (1,5 - 80 inches)

It uses advanced Doppler profiling technology to directly measure velocity profiles making it the best choice for sites with non-uniform, rapidly changing, backwatered, near zero, negative or everse flow conditions. This eliminates the need for on-site calibration, thereby reducing significantly the cost of installation.

Combined with an integral upward looking ultrasonic or a secondary external depth prseeure sensor (optional) for determining the depth, the meter is using a numerical model for averaged velocity in the entire cross section and the continuity equation to calculate flow. The system can be equipped with up to 4 analog inputs, up to 4 analog outputs, 2 digital outputs and 4 relays.

Mouse Type 

Q-Eye PSC MT Mouse Type

Insertion Type

Q-Eye PSC MT Insertion Type

Transmitter Unit

Transmitter Unit

Downloads

Applications